All prices include masking all threads, stripping, cleaning, degreasing, and coating parts.
There is a 50% additional charge for colors such as clear coats and translucent/anodized/candy colors due to being a 2-step coating process. These colors all have a * next to it on the color chart. Please give us a call or email us if you are unsure.
* Requires use of High Temp coating such as our Ceramic Coating that withstands up to 2000 degrees.
All prices are estimates only and pricing will depend on the amount of prep work involved.
Cast aluminum and magnesium parts may experience out-gassing and or bubbling in the finished powder coating. Roeder PowderCoat & Machine will take every precaution to avoid out-gassing, however Roeder PowderCoat & Machine cannot be held responsible for bubbling caused by porous coatings.
Each piece must be disassembled or additional charges will apply.
If you do not see a part listed that you would like to have powder coated please contact us.
All prices below are estimates only. Prices are subject to change upon inspection. The price minimum for any job is $50 & $20 minimum per color change.
Part Description | Price starting at: |
A-Arm | $25.00-$45.00 |
Air Intake Piping | $1.00 per inch |
Air Cleaner Base | $25.00-$35.00 |
Air Cleaner Lid | $15.00-$20.00 |
Battery Box | $30.00-$40.00 |
Battery Tray | $20.00-$30.00 |
Bolt Head (taped threads) | $2.00 each |
Brackets | Small $10.00 Medium $15.00 Large $20.00 |
Bumpers | $100.00-$200.00 (large off-road bumpers are $200+) |
Carburetor | $60.00-$100.00 |
Coil Spring | $20.00-$30.00 each |
Control Arm | $25.00-$40.00 each |
*Exhaust Manifold | Please see Ceramic Coating pricing |
Fan | $25.00-$35.00 |
Fan Shroud | $50.00-$60.00 |
Fuel Tank | $100.00-$125.00 |
Fuel Cell | $60.00-$80.00 |
Fuel Rail | $25.00-$35.00 |
*Headers | Please see Ceramic Coating pricing |
Headlight Buckets | $30.00 pair |
Headlight Ring | $20.00 pair |
*Heat Shield-Ceramic | Please see Ceramic Coating pricing |
Hood Hinges | $20.00-$40.00 each |
Hood Latch-Bottom | $15.00-$25.00 |
Hub Cap (metal) | $25.00 each |
Intake Manifold | 4, 6, 8 Cylinder: $80.00-$120.00 |
Inter-cooler (Our heat transfer coating works better at dissipating heat) | $60.00-$120.00 (depending on size) |
Inter-cooler Piping | $1.00 per inch |
License Plate Frame | $20.00 |
Lug Nuts | $2.00 each |
*O2 housing in Ceramic | Please see Ceramic Coating pricing |
Oil Pan | $55.00-$75.00 |
Pulley | Under 4″ Diameter: $20.00 Over 4″ Diameter: $25.00 |
Radiator Support | $125.00-$175.00 |
Rear Housing | Narrowed $100.00-$150.00 Full size: $150.00-$200.00 |
Roll Bar/Cage | $150.00-$250.00 |
Sub-frame | $250.00-$350.00 |
Springs | $30.00-$40.00 each |
Strut bar upper (only middle section if ends come off) | $20.00 |
Strut bar upper (ends included as 1 full bar) | $40.00 |
Strut bar lower (only middle section if ends come off) | $15.00 |
Strut bar lower (ends included as 1 full bar) | $35.00 |
Strut bar ends | $15.00 each |
Sway bar | $60.00-$80.00 |
Timing Cover | $30.00-$40.00 |
Transmission Pan | $35.00-$45.00 |
Turbo Compressor Housing Inlet | $45.00 |
*Turbo Turbine Housing – Outlet in Ceramic | Please see Ceramic Coating pricing |
Valve Cover | 4 Cylinder $50.00 Inline 6 Cylinder: $50.00 V-6 Cylinder $50.00-$90.00 pair V-8 Cylinder $50.00-$100.00 pair Polished lettering add $20.00-$30.00 Engraving add $25 design fee and $10 to $25 pair for engraving |
Washer | $1.00 each |
Water Pump (must remove bearings inside) | $40.00 |
Wheelie Bars | $80.00-$120.00 |
Windshield Wiper Arms | $30.00 pair |
Wheels (standard is 7″ wide wheel. Add $2 for every 1″ over 7″ in depth per wheel) Add an anti-corrosive primer treatment as a base coat for $25 per wheel. Add a clear topcoat for extra protection for $25 per wheel | 26″ + : $190.00 each 25″: $185.00 each 24″: $170.00 each 23″: $165.00 each 22″: $150.00 each 21″: $135.00 each 20″: $120.00 each 19″: $110.00 each 18″: $100.00 each 17″: $100.00 each 16″: $100.00 each 15″: $100.00 each 14″: $100.00 each 13″: $100.00 each |